Login Register Checkout My Account
Home : :  Sony Laptop Keyboard : :  SONY VAIO PCG-4N3L Keyboard

SONY VAIO PCG-4N3L Keyboard

    • Code :
    • SNKEY055B-US
    • Weight :
    • 430 g
    • Price :
    • USD$32.66
    • Availability  :
    • In Stock
    • Color :
    • Black
    • Layout :
    • US
Purchase Quantity : 
Tips: If you need other keyboard layouts, you can contact us by
Whatsapp +86 13080651989 Or by email service@cheaplaptopkeyboard.com

SONY VAIO PCG-4N3L Keyboard Introduction

SONY VAIO PCG-4N3L Keyboard is a high quality replacement keyboard which is perfect for replacing your old and broken laptop keyboard. US Layout and brand new, 100% compatible with your laptop, with 12 months warranty for manufacturer's defects and 30-days money-back guarantee on all products.

How to choose the correct SONY VAIO PCG-4N3L Keyboard?

Before you order,Please firstly compare the picture with your keyboard, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, please Contact us.

SONY VAIO PCG-4N3L Keyboard Fit Laptop Model.

How to Install / Replace your SONY VAIO PCG-4N3L Keyboard?

  1. Turn off your laptop. Disconnect the AC adapter and any cables, then remove the battery. Turn the laptop over and let it cool off for a few minutes before you begin.
  2. On the underside of the notebook, you'll find screws holding the keyboard and palm rest in place. Set the screws aside, and be sure to keep track of them all.
  3. Turn it over and open the Lid. Slide your fingers under the top of the palm rest and gently pull it up, moving from the center to the outer left and right edges. Leaving the fingerprint reader attached, place the palm rest down in front of the unit.
  4. Lift the damaged SONY VAIO PCG-4N3L Keyboard up from the front, then pull it toward you to release it from the notebook's frame. Pull up on the connector to detach.
  5. Attach the new SONY VAIO PCG-4N3L Keyboard replacement's connector. Position it over the space vacated by the old connector, and press down firmly until it snaps into place. Slide the top of the keyboard under the lip of the frame (near the display). Ensure that the top edges are just under the frame. Tilt the keyboard down until it lays flat and sits flush with the top, left, and right edges of the frame.
  6. Align the bottom edge of the palm rest along the base of the frame, then press down until the top is also in place. Press firmly on the left and right edges to snap the palm rest into place again.
  7. Close the Lid, and turn the notebook over. Replace all the screws, making sure to tighten them securely. Insert the battery, plug in your AC adapter, and enjoy your new keyboard.